|
|
Flojet's G56 Series pumps are designed for water boosting for filtration systems, supply carbonators, non-carbonated dispensing valves, carts, coffee machines, hand sinks, ice machines and FCB equipment. Supplies up to 4gpm (15lpm). If pumping over 1.7gpm (6.4lpm), a pulsation dampener or accumulator tank should be utilized to reduce pulsation, due to momentary shifts in flow requirements. (See Flojet's K56 series Water Booster Systems)
Features:
• Capable of CO2 inlet pressures, up to 90 psi (6.2 bar)
• Ultimate performance and reliability, with extended service life
• Quiet operation
• Easy installation with quick disconnect ports
| Specifications: |
|
|
| Pump Design | | Positive Displacement, Double Diaphragm
|
|
| Power Source | | CO2 Gas, Nitrogen or Compressed Filtered Air
|
|
| Materials of Construction | | Polypropylene,
Santoprene®, EPDM, AISI 303 & 304 Stainless Steel
|
|
| Temperature Range | | 34 - 120 °F 1.1 - 49 °C
|
|
| Displacement | | 3.2 oz. per cycle
|
|
| Self Priming | | Up to 10ft (3.05m)
|
|
| Operating Pressure | | 20 - 90 psi 1.4 - 6.2 bar
|
|
| Max. Liquid Inlet Pressure | | 30 psi 2.1 bar
|
|
| Flow Rate | | 5 gpm 18.9 lpm
|
|
| Weight | | 1.24 lb 0.56 kg
|
|
| Dimensions | | 5.27 H x 3.21 W x 4.58 D inches 13.38 x 8.15 x 11.63 cms
|
|
| Product Inlet Fitting | | 1/2" (9.52mm) plastic hose barb
|
|
| Product Outlet Fitting | | 1/2" (9.52mm) plastic hose barb
|
|
| Gas Inlet Fitting | | 1/4" (6.35mm) CO2 Shutoff Brass
|
|
