| Description |
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets. |
|
The Flojet 2840 Series Booster Systems are designed to provide a constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 gpm at 10 psi (0.7 bar). The pump is fully automatic, with built in inlet strainer, pressure switch and check valve, and supplies smooth flow from tricke to full flow. Typical uses include applications where available water pressure is very low, and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in. |
Flojet's K56 Series Water Booster Systems are designed for supplying consistent water pressure to beverage dispensers, coffee machines, water filtration systems, carbonators & ice machines. Supplies up to 4 gpm (15 lpm). For use when water requirement is over 1.7 gpm (6.4 lpm). |
Designed for dispensing Bag-in-Box syrups, juice concentrate (without pulp or particulate), teas, wines, draft beer and liquor. Supplies the following from remote location: eight (8) 3.0 oz. valves (Each valve dispenses syrup at 0.5 oz./sec) or four (4) 4.5 oz. valves (Each valve dispenses syrup at 0.75 oz./sec) |
Applications
; Dispense beer from keg, cask or brew kettle.
; Both long or short draw systems. |
Flojet's G56 Series pumps are designed for water boosting for filtration systems, supply carbonators, non-carbonated dispensing valves, carts, coffee machines, hand sinks, ice machines and FCB equipment. Supplies up to 4gpm (15lpm). If pumping over 1.7gpm (6.4lpm), a pulsation dampener or accumulator tank should be utilized to reduce pulsation, due to momentary shifts in flow requirements. (See Flojet's K56 series Water Booster Systems) |
Designed for dispensing BIB syrups, juice concentrates and condiments which have pulp, particulate or are highly viscous.
|
The new Flojet Series PulpJet Air Operated Diaphragm Pump is designed
for dispensing juice and smoothie mixes that contain pulp and particles.
The pump’s uniquely designed, central opening check valve allows soft solids
and stringy particles of at least 1/8" (3mm) to pass through without the risk of clogging, yet is still capable of high back pressures. The pump’s smooth flow path is great for liquids containing pulp that would otherwise get caught on moving parts or become emulsified into the finished product, and is therefore ideal for dispensing smoothie mixes
(mango, strawberry and banana), slushies, condiments, as well as acidic pizza sauce.
A built-in auto shutoff specifically tuned to highly viscous liquids, automatically turns the pump off when the bag is empty and restarts when a full bag is connected. PulpJet is part of the G Series line of Flojet beverage air operated pumps that are recognized for ultimate performance and service life.
|
Designed for dispensing Bag-in-Box syrups, juice concentrate (without pulp or particulate), teas, wines, draft beers and liquor. Supplies the following from remote location: four (4) 3.0 oz. valves (Each valve dispenses syrup at 0.5 oz./sec.) or two (2) 4.5 oz. valves (Each valve dispenses syrup at 0.75 oz./sec.) |
|
Designed for dispensing Bag-in-Box syrups, juice concentrate (without pulp or particulates), teas, wines and liquor.; Ideal for use in mobile carts and vending applications, where CO2 is not available. |
The Duplex II series of pumps incorporate the best technology and the features developed by Flojet. Everything from the back flow preventer, check valves, bearings and diaphragm assembly to the motor, have been designed to make this truly the most advanced and reliable diaphragm pump available. Higher efficiency of the pump is evident in the longer life of the motor pump unit. The new diaphragm design combined with the new valves makes the pump capable of pulling higher dry vaccuum. Duplex II is available in various performance ranges, voltages and with a choice of elastomers, making it easily adaptable to a diverse range of applications. |
Flojet Triplex High Pressure Pumps are engineered to be the the most advanced and reliable product available.
The redesigned and improved pumps offer unequaled performance and life.
Flojet’s unique three chamber design allows these pumps to operate at exceptional flow rates and pressures.
With operating pressures up to 150 PSI (10.3 Bar) and self-priming capabilities. Flojet Triplex pumps are
designed to be the most versatile pumps on the market today. They are the ideal solution for applications
including spraying, misting, filtration, cooling, dispensing and pressure boosting.
The Flojet Triplex Series High Pressure Pumps are available now in 12V DC, 24V DC, 115V AC and 230V AC models, and being made from Santoprene®/EPDM and Santoprene®/Viton® makes them capable of handling a broad range of chemicals. |
The AC Variable Speed Drive constant pressure pump system matches motor speed to system demand. As more liquid is needed, the motor responds to increase flow. Conversely, as the demand lessens, the motor slows to a "super quiet" speed, always retaining a constant system pressure. The result is exceptionally stable flow and reduced apm draw. The Flojet AC VSD sensor-controlled pumps provide stable, constant-pressure operation on any AC application. Operation from no flow to maximum flow is proportionally controlled, eliminating unwanted pump switch cycling and the need for an accumulator tank. |
This unit is designed to work in applications drawing water from a reservoir or a bottled water system such as coffee machines and carbonator pumps at soft drink kiosks. It will sense the water empty signal coming from the water level sensor and turn off coffee machine or carbonator pumps plugged into the appliance controller.
The unit is designed to detect any 0-5 VDC signal and this incoming signal can be used in many industrial application to turn connected devices ON or OFF.
This Appliance Controller can be mounted over or under the counter. |
At just 6" x 8", the Flojet Dual Inlet Bottled Water Dispensing System is the most compact system you can buy and it's the most affordable.
|
At just 6" x 8", the new Flojet Bottled Water Dispensing System is the most compact system you can buy and it's the most affordable.
|
Designed for dispensing wine, juice, teas or liquor from Bag-in-Box. Ideal for under counter installation |
| Materials of Construction |
|
|
|
Polypropylene,
Santoprene, EPDM, Nylon, Butyl,
AISI 303 & 304 Stainless Steel, Brass
|
Polpropylene,
Santoprene®, EPDM, AISI 303 & 304 Stainless Steel
|
Polypropylene,
Santoprene®, EPDM, AISI 304 Stainless Steel
|
Polypropylene,
Santoprene®, EPDM, AISI 303 & 304 Stainless Steel
|
Polypropylene,
Santoprene®, EPDM, AISI 303 & 304 Stainless Steel
|
Polypropylene,
Santoprene®, EPDM, AISI 303 & 304 Stainless Steel
|
Celcon M90, Santoprene®,
EPDM, 302 or 304 Stainless Steel Spring
|
|
|
|
|
|
Polycarbonate
|
|
|
|
