Selected Products > |
|
|
|
|
|
|
|
|
|
|
|
| Description |
Self-priming diaphragm pump with 110-240v AC electric motors. Flow rates from 4-8 litres/min (1-2.1 US gallons/min), pressure switch control or with a bypass, or both, capable of pressures up to 6.5bar (95psi) |
Self-priming diaphragm pump with 110-240v AC electric motors. Flow rates from 4-8 litres/min (1-2.1 US gallons/min), pressure switch control or with a bypass, or both, capable of pressures up to 6.5bar (95psi) |
Self-priming diaphragm pump with 12v or 24v DC electric motor. Flow rates from 4-8 litres/min (1-2.1 US gallons/min) |
Self-priming diaphragm pump with 12v or 24v DC electric motor. Flow rates from 4-8 litres/min (1-2.1 US gallons/min), pressure switch control or with a bypass, or both, capable of pressures up to 6.5bar (95psi) |
20 mesh (Course) stainless steel filter screen |
Self-priming diaphragm pump with 12v or 24v DC electric motor. Flow rates up to 17 litres/min (4.5 US gallons/min), pressure switch control, capable of pressures up to 3.2bar (45psi) |
Self-priming diaphragm pump with 12v or 24v DC electric motor. Flow rates up to 17 litres/min (4.5 US gallons/min) |
Small Boom and Spot Spraying;
Foam Marking;
Silage Treatment;
Estate Spraying;
Livestock and Poultry Cooling;
Dispensing;
Transfer of liquids; |
The Flojet 2840 Series Booster Systems are designed to provide a constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 gpm at 10 psi (0.7 bar). The pump is fully automatic, with built in inlet strainer, pressure switch, and check valve, and supplies smooth flow from tricke to full flow. Typical uses include applications where available water pressure is very low, and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in. |
|
|
| Voltage |
115 & 230, 50 or 60Hz VAC
|
115 & 230 VAC
|
115 & 230 VAC
|
115 & 230 VAC
|
|
12 or 24 Vdc
|
12 or 24 Vdc
|
115/230 VAC 12 Vdc
|
|
|
115/230 VAC 12/24 Vdc
|
| Flow Rate |
Up to 2.2 US Gallons/Min (8.6 Litres/Min)
|
Up to 2.2 US Gallons/Min (8.6 Litres/Min)
|
Up to 2.2 US Gallons/Min (8.6 Litres/Min)
|
Up to 2.2 US Gallons/Min (8.6 Litres/Min)
|
|
up to 5 US Gallons (18.9 Lires/min)
|
up to 5 US Gallons/Min (18.9 Litres/min)
|
2.0 gpm 7.8 lpm
|
Flow rates up to 6 US Gallons/min (22.7 Lires/min);
|
1.0 gpm 3.8 lpm
|
|
| Max. Pressure |
up to 100psi (6.9bar)
|
up to 100psi (6.9bar)
|
up to 100psi (6.9bar)
|
up to 100psi (6.9bar)
|
|
45psi (3.2bar)
|
40psi (2.8bar)
|
|
40psi (2.8bar)
|
|
10.3 - switch cutoff
9.7 - max running pressure bar 150 - switch cutoff
140 - max running pressure psi
|
| Elastomers |
EPDM, Santoprene, Nitrile or Viton
|
EPDM, Santoprene, Nitrile or Viton
|
EPDM, Santoprene, Nitrile or Viton
|
EPDM, Santoprene, Nitrile or Viton
|
|
EPDM, Santoprene, Nitrile or Viton
|
EPDM, Santoprene, Nitrile or Viton
|
|
|
|
Diaphragm - SantopreneTM;
Check valves - EPDM or Viton
|
| Port(s) |
3/8"
|
|
|
|
|
|
|
3/8” NPTF
|
|
|
|
| Port Type |
|
3/8"
|
3/8"
|
3/8"
|
|
|
|
|
1/2" or 3/4" hose barb
|
3/8" (9.5 mm) Hose Barb
|
|
| Motor |
|
|
|
|
|
|
|
Permanent magnet TENV (non-ventilated)
|
|
Permanent Magnet Motor
|
Permanent magnet DC and
Rectified (PMDC) AC
|
| Pump Design |
|
|
|
|
|
|
|
Three Chamber
|
|
Reciprocating Diaphragm
|
Motor operated 3 chamber diaphragm
|
| Amp Draw |
|
|
|
|
|
|
|
8 amp
|
|
|
|
| Pressure Switch Setting |
|
|
|
|
|
|
|
2.0-4.1 bar 30-60 psi
|
|
12.4 - Off
1.7 - On bar 35 - Off
25 - On psi
|
|
| Max. Operating Pressure |
|
|
|
|
|
|
|
3.4 bar 50 psi
|
|
|
|
| Max. Fluid Temperature |
|
|
|
|
